Connecting The Computer To The Projector And Starting Up The Dcc - NEC PH3501QL Installationsanleitung

2-2-3. Connecting the computer to the projector and starting up the DCC

1. Connect the computer on which the DCC is installed to the LAN port on the projector using a commercially
available LAN cable.
NOTE
• The DCC cannot be connected to the HDBaseT port.
2. Set the projector to the standby mode.
Follow the instructions at "4-2. Turning on the Projector" (→ page 70) and set the projector to the standby mode.
3. Start up the DCC.
From the Windows [Start] menu, select [All Programs] → [Projector User Supportware] → [DCC].
The DCC starts up.
TIP:
• If the "Language Select" screen appears, select the display language.
• To change the display language, click "Option" - "Language" from the toolbar.
• If a Chinese font or Japanese font is not installed on your PC, then displaying Chinese or Japanese is not supported and the [
中文] button or [日本語] button is not displayed.
• DCC supports "English", "Chinese (Simplified)", and "Japanese" for display.
2. Configuring the projector's initial settings
54