NEC PH3501QL Installationsanleitung Seite 99

Note on Startup screen (Menu Language Select screen)
When you first power on the projector, you will get the Startup menu. This menu gives you the opportunity to select
one of the 30 menu languages.
To select a menu language, follow these steps:
1. Use the ▲, ▼, ◀ or ▶ button to select one of the 30
languages from the menu.
2. Press the ENTER button to execute the selection.
After this has been done, you can proceed to the menu
operation.
If you want, you can select the menu language later.
NOTE:
• If the message, [PLEASE SET "DATE AND TIME".] is shown, please set the current date and time.
• When the KEY LOCK indicator is flashing, that means [CONTROL PANEL LOCK] has been set and pressing the
cause the unit to power-on. Release [CONTROL PANEL LOCK].
• While the POWER indicator is blinking green in short cycles, the power cannot be turned off by using the power button. (While
the POWER indicator is blinking green in long cycles, the [OFF TIMER] is functioned and the power can be turned off.)
4. Projector Adjustment and Connecting
73
button will not