NEC PH3501QL Installationsanleitung Seite 81

4. Setting a connection destination
When the DCC is activated, the Projector Select screen is displayed. This screen is used to set the IP address or
host name of the connection destination device. The connection destination devices that have been connected
to are saved in a history, and the connection destination can be selected from this history. This screen can be
displayed also by selecting "Select Projector... " from the tool bar.
Multiple connection
"Add" button
"Edit" button
"Delete" button
"History" button
Check that the IP address is set to the factory default of "192.168.10.10", then click the [OK] button.
Allows to set multiple connection destination devices.
Without check: Set only 1 connection destination device.
With check: Set multiple connection destination devices. When mul-
tiple destination devices are set, the currently connected device is
located at the top of the connection list.
Enter the network setting of the connection destination device. Select
the IP address or the host name and enter the necessary items.
IP Address/Host Enter the IP address.
• When entering an address from the connection history, double-
Value set at factory shipment: 192.168.10.10
Projector Name Displays the host name of the connection destination device.
Adds a connection destination device.
Sets the connection destination device.
Deletes the connection destination device.
Edits (or deletes) the information history of the connection destina-
tion device.
2. Configuring the projector's initial settings
click the IP address/Host field, then select the connection history
displayed.
55