NEC PH3501QL Installationsanleitung Seite 59

7. Remove the fixing screws (at two points), eject the fixing bracket in the direction of the arrow, and pull out
the power connector.
8. Configure the power supply for C1 connection.
For C1 connection, connect the inner-side connector.
9. Return the power connector and the fixing bracket to their original position, and fix the fixing screws (at
two points).
10. Fix the plate inlet with the fixing screws (at six points).
In Europe, fix the supplied ⌀35 plate inlet.
Connect
33
1. Before Setting Up Your Projector
Connect