Ottobock 1C60 Triton Gebrauchsanweisung Seite 14

3.1 Scope of delivery
The 1C60 Triton Prosthetic Foot is delivered with the following components:
• 1C60 Triton Foot Module
• 2F60 Heel Wedge Kit
• SL = Spectra-Sock Protective Sock
• 647G22 Instructions for Use
3.2 Components (see Fig. 2)
• Aluminium Adapter (1)
• Carbon Fibre Attachment Spring (2)
• Optional Heel Wedge (3)
• Carbon Fibre Heel Spring (4)
• High Performance Polymer Base Spring (5)
• Carbon Fibre Forefoot Spring (6)
3.3 Single Components
2C6 footshell including connection cap
2C6=*S Slim Footshell
2C6=*N Normal Footshell
3.4 Single Component Pack (see Fig. 1)
2F60 Triton Heel Wedge Kit
4 Assembly
CAUTION
Incorrect alignment or assembly
Injuries due to fall resulting from damaged prosthesis components
• Observe the alignment and assembly instructions.
4.1 Setup
4.1.1 Footshell application / removal
NOTICE
Risk of damage as a result of improper use.
The foot is designed to be used with the footshell. Please avoid frequent removal from and in-
sertion into the footshell as this can damage the carbon fibre elements.
NOTICE
Risk of damage as a result of improper footshell assembly.
Do not use a screwdriver for assembly and disassembly as this can cause damage to the
carbon elements and/or footshell. Ottobock recommends use of 2C100 Footshell Insertion/
Removal tool (accessories).
14 | Ottobock
(see Fig. 1)
1C60 Triton Prosthetic Foot