Fault Level (Menu 6) - Carrier CCU Controller Bedienungsanleitung

6.3.3 FMA3 information (sub-menu 10.3)
Access
No.
level
1 1100 FMA3 max. speed
1 1101 FMA3 requested speed
1 1102 FMA3 current speed
1 1103 FMA3 current consumed
1 1104 FMA3 peak supply voltage
1 1105 FMA3 power input
1 1110 FMA3 fault summary
1 1111 FMA3 start-up fault
1 1112 FMA3 rotation direction fault
1 1113 FMA3 current limitation
1 1114 FMA3 temperature limitation
1 1115 FMA3 off
1 1120 FMA3 internal DC voltage
1 1121 FMA3 IGBT temperature
1 1122 FMA3 indoor room temperature
1 1123 FMA3 MCU temperature
1 1124 FMA3 motor temperature
1 1148 FMA3 product code
1 1149 FMA3 software version

7 - FAULT LEVEL (menu 6)

Each type of fault can be forwarded to one of the following two changeover contact relays:
• Non-critical fault relay.
• Critical fault relay.
This menu is used to configure which type of fault will be forwarded to which relay (critical or non-critical).
No. Description
N02 No air flow (*)
N03 Fan (*)
N05 Filtration fouled
N06 Filtration blocked (*)
N07 Temperature sensors
N08 Electric heater
N09 Humidifier
N11 Water leak
N13 Temperature set high
N14 Temperature set low
N15 Relative humidity set high
N16 Relative humidity set low
Note:
• The faults marked (*) shut down the machine
• If the master/slave function is used, the faults defined as critical stop the unit.
Description
Setting
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
0: Non-critical fault
1: Critical fault
EN - 21
By default Display condition
rpm P05 = 3
rpm P05 = 3
rpm P05 = 3
A P05 = 3
V P05 = 3
W P05 = 3
Off/On P05 = 3
Off/On P05 = 3
Off/On P05 = 3
Off/On P05 = 3
Off/On P05 = 3
Off/On P05 = 3
V P05 = 3
°C P05 = 3
°C P05 = 3
°C P05 = 3
°C P05 = 3
P05 = 3
P05 = 3
Unit Display condition
1
1
0
1
1
0 P16 > 0
0 P10 > 0
0
0 P07 > 0 or P08 > 0
0 P07 > 0 or P08 > 0
0 P09 > or P10 > 0
0 P08 > 0 or P10 > 0
EN