Carrier CCU Controller Bedienungsanleitung Seite 39

CONTENTS
1. GENERAL INFORMATION
2. COMPONENTS
2.1 On the front:
2.2 On the rear:
3. MENU TREE
4. ACCESS LEVEL (menu 8)
5. CONFIGURING THE NUMBER OF UNITS
6. CONFIGURING THE UNIT.
6.1 Unit parameters
6.2 Humidifier parameters (visible if P10=2)
6.3 Supply air fan parameters (visible if P05=1 or 2 or 3)
7. FAULT LEVEL (menu 6)
8. WEEKLY PROGRAMMING (menu 5)
8.1 Ventilation on sub-menu 5.1
8.2 Shifting the temperature setpoints (sub-menu 5.2)
8.3 Using the weekly programming
9. CONTROL
10. SENSORS
11. COMMISSIONING
12. CHANGING THE CONTROLLER PROGRAM VERSION
13. BUS FOR MASTER/SLAVE FUNCTION
13.1 Bus connection
13.2 Addressing procedure for the units
14. BUS FOR CONNECTION TO A CMS
14.1 Bus connection between the units and the CMS.
14.2 Configuring the communication bus parameters (menu 7)
15. MODBUS PROTOCOL
16. LON GATEWAY for CCU CONTROLLER
16.1 LON Gateway Connection
16.2 Connecting the RS485 bus (2-Wire) between a controller and the various units to be forwarded to the CMS
16.3 Gateway wiring diagram
16.4 List of parameters
Original text: English Version
EN - 1
EN
PAGE
2
3
3
4
7
10
10
12
12
18
20
21
22
22
22
22
22
23
24
26
27
27
27
28
28
29
29
31
32
33
34
35