Test Mode Menu; Access Level Menu - Carrier 42AM Regelungshandbuch

4 - GENERAL DESCRIPTION OF THE SCREENS

4.9 - Test mode menu

If all the controller's outputs are overridden, the alarms will not be signalled on the display.
Disconnecting the display will maintain the override and may result in damage to the hardware.
This menu can only be accessed in level 3 and with the unit off.
ACTIVATION OF ALL OVERRIDES IS THE PROGRAMMER'S RESPONSIBILITY
The unit must be in "
Select the output to be changed by pressing  or . Confirm by pressing ENTER.
The cursor places itself below the override authorisation (free or overridden). Confirm by pressing ENTER.
The cursor places itself under the override value. Display the new value by pressing the  or  key. Confirm by pressing ENTER.
The unit is now in "test mode".
The overrides are cancelled when the unit is set back to "on"
Output
Air heater fan
42AMA fan
Coil valve
Fresh air damper
Fault relays

4.10 - Access level menu

Access levels .
Current level: 1
Access level 1 ->
Level 2 access
Level 3 access
Access levels .
LEVEL 1 ACCESS
Back to level 1:
No
XX7515390-03_CONTROL_11_2019_BOX_MONO_EC_42AM.indb 35 XX7515390-03_CONTROL_11_2019_BOX_MONO_EC_42AM.indb 35
Overriding the outputs
NONE OF THE SAFETY DEVICES ARE OPERATIONAL
" mode.
Parameter Setting range
State 0-10 V 0-100%
State 0-10 V 0-100%
State 0-10 V 0-100%
Damper state Open/Closed
Danger Open/Closed
Maintenance Open/Closed
Displays the current level
Visible only if the current level = 2 or 3, used to access or return to level 1
Visible only if the current level = 1 or 3, used to access or return to level 2
Visible only if the current level = 1 or 2, used to access or return to level 3
If level 1 access selected
If yes back to access level 1
f1
Unit off
WARNING!
Default value
0%
0%
0%
Closed
Closed
Closed
Access level Mask
3 f2
3 f3
3 f4
3 f5
3 f6
3 f6
03/12/2019 11:11:29 03/12/2019 11:11:29
35