Introduction - ProMinent DULCOTEST CLT 1-mA-2 ppm Montage- Und Betriebsanleitung

Introduction

1 Introduction
These operating instructions provide informa‐
tion on the technical data and functions of the
DULCOTEST sensor for chlorite, Type CLT 1
®
Tab. 2: Standard scope of supply
1 sensor complete with sensor cap, protective cap and clamp ring.
1 bottle with electrolyte (100 ml) and nozzle.
1 spare diaphragm cap.
1 set of operating instructions.
1 screwdriver.
Fig. 1: Standard scope of supply
8
From 08/08/2012, black diaphragm caps (1) are
delivered for sensor type CLT1-mA (chlorite
measurement parameters) with the order
number 1002710. This diaphragm cap is also
compatible with sensor type CLT1-mA, which
was originally delivered with a red diaphragm
cap (order number 1021824).
A2492