ProMinent DULCOTEST CLT 1-mA-2 ppm Montage- Und Betriebsanleitung Seite 2

Overall Table of Contents
Overall Table of Con‐
tents
EN
DULCOTEST
®
CLT 1-mA-2 ppm; CLT 1-mA-0.5
ppm..................................................... 4
1 Introduction.................................... 8
1.1 Labelling of Warning Informa‐
tion.............................................. 8
1.2 User qualification...................... 10
1.3 General Safety Information...... 11
1.4 Intended Use............................ 12
1.5 Information in the event of an
emergency................................ 12
2 Construction and Function.......... 13
2.1 Construction............................. 13
2.2 Function.................................... 14
3 Storage and Transport of the
Sensor......................................... 15
3.1 Storage..................................... 15
3.2 Transport.................................. 15
3.3 Packaging material................... 15
4 Assembly..................................... 16
4.1 Filling electrolyte....................... 17
4.2 Install the sensor in the bypass
fitting......................................... 19
5 Installation................................... 21
6 Putting the sensor into opera‐
tion............................................... 23
6.1 Calibration................................ 23
7 Information on Troubleshooting
and Fault Elimination................... 25
8 Maintenance and Repair Work
on the Sensor.............................. 28
9 Remove sensor from operation
either temporarily or perma‐
nently........................................... 29
10 Use Parts Disposal/Declaration
of Decontamination................... 30
2
Sensor CLT Type:
11 Ordering information for spare
parts/consumables.................... 31
12 Technical data........................... 34
13 Directives / standards adhered
to............................................... 36
DE
DULCOTEST ®
CLT 1-mA-2 ppm; CLT 1-mA-0,5
ppm................................................... 40
1 Einleitung..................................... 44
1.1 Kennzeichnung der Warnhin‐
weise........................................ 44
1.2 Benutzer-Qualifikation.............. 47
1.3 Allgemeine Sicherheitshin‐
weise........................................ 48
1.4 Bestimmungsgemäße Verwen‐
dung......................................... 49
1.5 Angaben für den Notfall............ 49
2 Aufbau und Funktion................... 50
2.1 Aufbau ..................................... 50
2.2 Funktion.................................... 51
3 Lagern und transportieren des
Sensors....................................... 52
3.1 Lagern...................................... 52
3.2 Transport.................................. 52
3.3 Verpackungsmaterial................ 52
4 Montieren.................................... 53
4.1 Elektrolyt einfüllen.................... 54
4.2 Sensor in die Bypassarmatur
einbauen................................... 56
5 Installieren................................... 58
6 Nehmen Sie den Sensor in
Betrieb......................................... 60
6.1 Kalibrieren................................ 60
7 Hinweise zur Fehlersuche und
Beseitigung.................................. 62
8 Wartungs- und Reparaturar‐
beiten am Sensor........................ 65
9 Sensor vorübergehend oder
ganz außer Betrieb nehmen........ 66
Sensor CLT Typ: