PeakTech 1145 Bedienungsanleitung Seite 77

7.3. Taking 2-Channel Measurements
Suppose you need to measure both channel 1 and 2 at the same time. Measuring the gain of the audio amplifier would
be a similar problem. To do this, follow these steps:
1. Connect the probes. Push the CH 1 MENU and CH 2 MENU buttons until they are switched on.
2. Push the AUTOSET button.
3. Push the CH1 MENU button to turn on the channel 1 display.
4. Using the VOLTS/DIV, POSITION knobs, adjust the display.
5. Push the CH 2 MENU button to turn on the channel 2 display.
6. Repeat 4.
7. Read the displayed resulting waveforms for both channels.
-35-