5.10. Utility
1) System Status
Selecting System Status from the utility menu displays the menus available for obtaining a list of control settings for
each group of instrument controls.
Vertical :
Lists vertical parameters of channels.
Horizontal :
Lists horizontal parameters of channels.
Trigger :
Lists trigger parameters
Misc :
Shows the information. That is the software version and processor release level. If the option module
is installed, the setting of RS-232C and the setting of hardcopy are add.
SVC :
This menu is only used for the service engineer.
2) Options:
This menu changes with the addition of option modules. The menus explained here relate to the product with no
modules installed. Refer to the manual supplied with your option module for items not discussed here.
Push the UTILITY button to display the UTILITY menu. The UTILITY menu
is changed with the addition of interface modules.
The menu explained here relates to the product without module installed.
Refer to the manual supplied with your interface
module for items not discussed here.
-25-