4.4. Trigger
TRIGGER MENU
Adjust the trigger mode.
TRIGGER SOURCE
Select the trigger signal source.
SET LEVEL TO 50%
Set the trigger level to the middle of the scope waveform.
TRIGGER LEVEL
Selects a starting point of triggered signal.
4.5. Menus
MEASURE
Controls the measurement functions.
SAVE/RECALL
Controls the save/recall functions.
ACQUIRE
Controls the acquire mode.
CURSORS
Controls the cursor functions.
UTILITY
Sets the utility functions.
DISPLAY
Sets the display mode.
AUTOSET
Automatically displays the optimum waveform of input signals.
-11-