Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.9. Cursors
1) Type (Off/Voltage/Time)
This is used to set the type and on/off mode of cursor. Pressing this button, OFF, Voltage and Time are changed in
sequence. At every time, present measuring value is showed up at the menu display.
Off :
This cancels the cursor mode
Voltage :
Measuring the voltage of vertical parameter. Two horizontal cursors show up.
Time :
Measuring the time of horizontal parameter. Two vertical cursors show up.
2) Source (CH 1/CH 2)
Choose the waveform on which to take the cursor measurement.
3) Cursor 1
Displays cursor 1 location.
4) Cursor 2
Displays cursor 2 location.
5) Delta
Display the gap between cursors .Use the function knob to move the cursors. You can move the cursors only while
the cursor menu is displayed.
The user can operate the cursor by himself and measure the
voltage or time of displayed waveform. These functions can be
stopped or canceled automatically in the modes of MEASURE,
PASS-FAIL setting, XY format.
-24-
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
