PeakTech 1145 Bedienungsanleitung Seite 64

1) Type (Setups/Waveform): Setups
This operates the function to save present working condition into memory space.
Setup (0/1/2/3/4/5/6/7/8/9):
The menu displays the memory space to save information, and it is able to save up to 10 setup conditions They don't
be
overlapped with memory space for waveforms.
Save:
The saved setup information includes the conditions of input coupling, display, volts division, trigger mode, trigger
coupling, trigger source, trigger slope, trigger level, cursor information, probe factor, LCD brightness, display format,
display type, acquisition type and interface card setup.
Recall:
Recalls the instrument settings stored in the location chosen in the setup space.
Recall Factory:
You can recall the default Factory Setup to initialize the instrument to a known setup.
2) Type /Setups/Waveform): Waveforms
This operates the function to save waveform being displayed at present into memory space.
Reference (0/1/2/3/4/5/6/7/8/9)
This function displays the memory space to save waveforms, and it is able to save 10 waveforms . The memory space
don't be overlapped with that for setup condition.
Save:
Stores the source waveform to the chosen reference location.
Recall:
Turns the reference waveform display on or off.
On : you will be in the mode from which the waveform was saved.
Off: This menu operates to cancel present displayed waveforms and to return to the former waveforms.
-22-