When using PC communication operation, RS-232C settings are as follows
Before communicating with a PC, the PC software kit(option) should be installed in your PC. If you want to have more
detailed information, refer to the PC software kit manual.
When using PC communication operation, the USB settings are as follows
Before communicating with a PC, the PC software kit (optional) should be installed in your PC, and the interface card
with USB should be installed in your instrument. The USB protocol is spec V1.1.
For more detailed information, refer to the PC software kit manual.
If users want to connect the instrument with the computer and use it, the port needs to be set to the connection format
between them and the transmission format needs to be set to the BMP format.
* This instrument supports DeskJet and
LaserJet with PCL level 3
* DeskJet , LaserJet is registered trade
mark of HP.
-6-