Starting And Break-In; Starting A Warm Engine - Yamaha WR250F Fahrer- Und Wartungshandbuch

Vorschau ausblenden Andere Handbücher für WR250F:

Inhaltsverzeichnis

STARTING AND BREAK-IN

Do not operate the cold starter knob and throt-

tle. Open the hot starter knob (red) and start

the engine by kicking the kickstarter crank

forcefully with a firm stroke.

As soon as the engine starts, push in the hot

starter knob to close the air passage.

Restarting an engine after a fall

Pull the hot starter knob (red) and start the

engine. As soon as the engine starts, push in

the hot starter knob to close the air passage.

The engine fails to start

Pull the hot starter knob (red) all the way out,

pull the decompression lever to the handlebar,

and while holding the lever, kick the kickstarter

crank 10 to 20 times to clear the engine.

Then, restart the engine.

Refer to "Restarting an engine after a fall".

Air temperature = less than

5 ˚C (41 ˚F)

Air temperature = more

than 5 ˚C (41 ˚F)

Air temperature (normal tem-

perature) = between 5 ˚C

(41 ˚F) and 25 ˚C (77 ˚F)

Air temperature = more

than 25 ˚C (77 ˚F)

Starting an engine after a long

period of time

Restarting a warm engine

Restarting an engine after a fall

* Operate the throttle grip before kick starting.

Observe the following break-in procedures

during initial operation to ensure optimum

performance and avoid engine damage.