Yamaha WR250F Fahrer- Und Wartungshandbuch Seite 510

FRONT BRAKE AND REAR BRAKE
5 - 20
2. Install:
Brake disc cover 1
G
Bolt (brake disc cover) 2
G
7 Nm (0.7 m · kg, 5.1 ft · lb)
3. Install:
Copper washer 1
G
Brake hose 2
G
Union bolt 3
G
30 Nm (3.0 m · kg, 22 ft · lb)
WARNING
Always use new copper washers.
CAUTION:
Install the brake hose to the brake caliper
with the paint a on the pipe facing the
brake caliper and with the pipe contacting
the brake caliper projection b.
4. Install:
Brake caliper 1
G
Rear wheel 2
G
Refer to "FRONT WHEEL AND REAR
WHEEL" section.
5. Tighten:
Pad pin 3
G
18 Nm (1.8 m · kg, 13 ft · lb)
6. Install:
Pad pin plug 4
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
CHAS