Introduction; Safety - EBARA GMB GS Gebrauchs- Und Wartungsanleitung

1. INTRODUCTION

EN
Thank you for choosing this EBARA GS model pump. This operating manual describes
the correct installation, operation and maintenance procedures of the product. EBARA
pays great attention to the manufacturing of its products so that their use by end-users
may be as safe as possible. However, using this pump improperly may reduce its oper-
ating performance and lead to personal injury and damage to property.
All our devices are delivered after being checked at our own plant and so they are in a
condition to operate correctly after being connected to the power supply and the water
system, as shown in this manual.
When this device is delivered:
Check the nameplates. It is very important to check the voltage rating for the pump.
1
Also, check the value of the head, the capacity and the RPM of the pumps, as well
as the maximum absorption of the motors.
Double check the equipment to make sure there is no damage generated during the
2
start up and that there are no loose screws or mountings.
Check that all the accessories, spare parts and required options are included within
3
the supply.
We recommend that you keep this manual in a safe place so that it may be consulted
whenever needed.

2. SAFETY

This instruction and maintenance manual includes the basic instructions that should be
taken into consideration during installation, operation and maintenance of the equip-
ment.
It is essential that the worker/installer reads all the sections in this manual carefully be-
fore installation and operation. We recommend that you keep this manual in the place
where you plan to install the equipment. In addition to the safety instructions found in
this manual, it is also necessary to take into account the safety regulations and stand-
ards in force in the country where you want to use the equipment, in order to achieve
greater protection.
Disregarding the safety instructions shown in this manual may lead to risks to persons
and equipment.
4
Generic hazard
Instruction and Maintenance Manual
Electrical Voltage