Appendix; Performing A Firmware Update Via Usb Stick - Auerswald COMfortel 3500 Inbetriebnahmeanweisungen

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Performing a Firmware Update via USB Stick

Note: Up-to-date firmware files are available on the support pages on the
Auerswald homepage (Internet address: www.auerswald.de).
The operation and configuration instructions of the telephone also describe
further variants of the firmware update.
Requirements
– The firmware file (*.rom) which is saved on a USB stick
Steps to Take
1.
Insert the USB memory stick in the jack labelled with
side of the telephone.
2.
Subsequently, tap on the elements All apps > Settings > Update & Pro-
visioning.
3.
Tap on the name of the firmware file (e.g. comf3500_v12f.rom).
Further Steps
If the description of the new function is missing after the installation of func-
tional extensions by means of a firmware update, you will be granted
access to the current instructions on the support pages on the Auerswald
homepage (Internet address: www.auerswald.de).
In order to use the new features after a firmware update of the telephone,
an update of the PBX firmware is often necessary (see PBX operation
instructions).
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12

Appendix

If the telephone can find an appropriate firmware file on the USB mem-
ory stick, this file will be displayed under Update from USB stick an-
gezeigt.
The telephone performs the firmware update and subsequently re-
starts.
Appendix
on the lower
61