Changing The Radio Channel - Auriol AFT 77 A1 Bedienungsanleitung

Changing the radio channel

Changing the radio channel on the
outdoor sensor
You can select between 3 radio channels .
Channel 1 is preset .
♦ Open the battery compartment i on
the rear of the appliance by removing the
battery compartment cover o .
♦ Select a radio channel by pushing the
channel selector u to CH1, CH2 or CH3 .
♦ Press and hold the
reception signal
temperature panel 4 .
Press the TX button z to manually initiate
♦
the outdoor sensor radio signal . If recep-
tion is successful, the temperature on the
outdoor temperature panel 4 will now be
displayed on the new radio channel .
♦ Close the battery compartment i again .
Changing the radio channel display
on the temperature station
If the temperature station is receiving the out-
door sensor radio signal, it will automatically
display the corresponding channel .
However, you can also manually set the dis-
play of various radio channels .
♦ Press the
switch between the displays CH1 (display
channel 1), CH2 (display channel 2), CH3
(display channel 3) and
channels alternately in a loop) .
│ GB │ IE
■ 54
button 0 until the
flashes on the outdoor
button 0 repeatedly to
(display all
AFT 77 A1