Displays In Basic Mode - Auriol AFT 77 A1 Bedienungsanleitung

The DCF signal
The DCF signal (time signal transmitter) consists
of time impulses which are transmitted by the
most accurate clock in the world – near Frank-
furt am Main, Germany .
Under ideal conditions, the radio temperature
station can receive the signals up to a distance
of around 2000 km from Frankfurt am Main .
Reception of these DCF signals normally takes
between 3 and 5 minutes . If reception of the
DCF signal fails, the temperature station will
stop trying to establish reception after around
7 minutes .
Reception can be considerably restricted by
obstacles (e .g . concrete walls) or interference
sources (e .g . other electronic appliances) .
If necessary, you should change the location
of the temperature station (e .g . put it by a
window) if reception problems continue .

Displays in basic mode

Once the temperature station has received the
outdoor sensor signal and the DCF signal, it is
in basic mode .
In basic mode, the temperature station shows
the following information on its display:
│ GB │ IE
■ 44
AFT 77 A1