Battery Display; Changing The Radio Channel - Auriol AFT77A1 Bedienungsanleitung

Battery display

If the battery symbol is shown on the indoor
temperature panel , the batteries in the tem-
perature station should be replaced as soon as
possible (see also the section Operating the
temperature station).
If the battery symbol is shown on the outdoor
temperature panel , the batteries in the
outdoor sensor should be replaced as soon
as possible (see also section Operating the
outdoor sensor).

Changing the radio channel

Changing the radio channel on the
outdoor sensor
You can select between 3 radio channels.
Channel 1 is preset.
♦ Open the battery compartment
the rear of the appliance by removing the
battery compartment cover .
♦ Select a radio channel by pushing the
channel selector
♦ Press and hold the
reception signal
temperature panel .
♦ Press the TX button
the outdoor sensor radio signal. If recep-
tion is successful, the temperature on the
outdoor temperature panel
displayed on the new radio channel.
♦ Close the battery compartment
│ GB │ IE
■ 58
to CH1, CH2 or CH3.
button
flashes on the outdoor
to manually initiate
on
until the
will now be
again.
AFT 77 A1