Functional Description - Abicor Binzel iCAT mini ABIROB G Serie Betriebsanleitung

iCAT mini
4.2 Storage

5 Functional description

6 Commissioning
BAL.0361.0 • 2017-05-05
Physical storage conditions in a closed environment:
 Tab. 5 Ambient conditions for transport and storage on page EN-8
The iCAT mini robot mount is used to mount welding torches in exact position.
The mount is fastened to the robot by means of cylinder head screws and a
robot flange. In the event of a collision, the iCAT mini can be moved up to
11° in the X and Y directions. This minimizes the risk of damage to the torch,
peripheral equipment, and robot.
DANGER
Risk of injury due to unexpected start
The following instructions must be followed during all maintenance,
servicing, assembly, disassembly, and repair work:
• Switch off the power source.
• Close off the gas supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
CAUTION
Risk of injury
Physical injury due to falling devices and add-on components.
• Avoid abrupt lifting and setting down.
• Do not lift the components over persons or other devices.
• Note the weight of the individual components.
 3.1 Technical data on page EN-7
NOTICE
• Commissioning of the iCAT mini mount is permitted only by trained
personnel.
5 Functional description
EN - 11