Abicor Binzel iCAT mini ABIROB G Serie Betriebsanleitung Seite 39

iCAT mini
6.3.1 Standard model
1 2
1 Cylinder head screws M4 × 20
2 Cable assembly flange
3 iCAT mini release flange
Fig. 8 Mount cable assembly—standard model
BAL.0361.0 • 2017-05-05
3
8
4 Machine-side connection
5 Push-in fitting
The cable assembly is guided through the mounted robot mount.
1 Disassemble the push-in fitting (5) if already mounted.
2 Mount the cable assembly in mounting direction.
3 Mount the cable assembly with seven cylinder head screws M4 × 20 (1)
to the iCAT mini. Max. tightening torque 4 Nm.
4 Tighten the push-in fitting ø 6 using the screw-in aid AF11 (6).
5 Insert the shielding gas hose (7) and connect it to the shielding gas supply.
6 Mount bellows (8).
6
ø 6 / G1/8"
7
8
6 Commissioning
Screw-in aid AF11
ø 6
Shielding gas hose
Bellows
EN - 15
4
5
6
7