Abicor Binzel iCAT mini ABIROB G Serie Betriebsanleitung Seite 41

iCAT mini
6.4 Attaching the ABIROB
1
1 Protective cap
®
2 ABIROB G350 torch neck
Fig. 10 Attaching the ABIROB
BAL.0361.0 • 2017-05-05
6 Mount the bellows (3) with hole (1), (2) on the iCAT mini release
flange (6).
7 When mounting the bellows (3), guide the plastic tube (5) through the
hole (2).
8 Guide the wire brake (4) through the hole (1) in the bellows (3) and screw
into the cable assembly flange (7).
9 Connect the plastic tube (5) to the wire brake (4).
NOTICE
• The welding current port must be connected to the wire feeder.
 Operating instructions for wire feeder
®
G350 torch neck
2
3 Interface to welding torch
4 iCAT mini
®
torch neck
3
5
6
6 Commissioning
6
Bellows
Cylinder head screw M5 × 16
EN - 17
4
5