Abicor Binzel iCAT mini ABIROB G Serie Betriebsanleitung Seite 44

9 Maintenance and cleaning
9.1 Standard model
1
1 Protective cap 2
Fig. 12 Cleaning—standard model
EN - 20
WARNING
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in
particular safety goggles.
NOTICE
• The specified maintenance intervals are standard values and refer to
single-shift operation.
• Maintenance and cleaning work must only be carried out by qualified
personnel (in Germany, see TRBS 1203).
• Always wear your personal protective equipment when performing
maintenance and cleaning work.
2
Bellows 3 iCAT mini without bellows and protective cap
We recommend you clean the iCAT mini every three months.
1 Remove the protective cap (1).
2 Pull off the bellows (2) over the torch neck.
3 Clean exposed parts with compressed air.
4 Remount the bellows (2) and put on the protective cap (1) again.
iCAT mini
3
BAL.0361.0 • 2017-05-05