Abicor Binzel iCAT mini ABIROB G Serie Betriebsanleitung Seite 49

iCAT mini
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
BAL.0361.0 • 2017-05-05
When disposing of the system, local regulations, laws, provisions, standards
and guidelines must be observed. To correctly dispose of the product, it must
first be disassembled.
Note of the following information:
 11 Disassembly on page EN-23
This product is mainly made of metallic materials that can be melted in steel and
iron works and are thus almost infinitely recyclable. The plastic materials used
are labeled in preparation for their sorting and separation for later recycling.
Oil, greases and cleaning agents must not contaminate the ground or enter the
sewage system. These substances must be stored, transported and disposed of
in suitable containers. Observe the relevant local regulations and disposal
instructions in the safety data sheets specified by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the consumables'
manufacturer.
ABICOR BINZEL has reduced the transport packaging to the necessary
minimum. The ability to recycle packaging materials is always considered
during their selection.
12 Disposal
EN - 25