Abicor Binzel iCAT mini ABIROB G Serie Betriebsanleitung Seite 40

6 Commissioning
6.3.2 Model with wire brake
1 2
12
1 Hole 1
2 Hole 2
3 Bellows
4 Wire brake
Fig. 9 Mounting the cable assembly—model with wire brake
EN - 16
3
5 Plastic tube
6 iCAT mini release flange
7 Cable assembly flange
8 Machine-side connection
The cable assembly is guided through the mounted robot mount.
1 Disassemble the push-in fitting (9) if already mounted.
2 Mount the cable assembly in mounting direction.
3 Mount the cable assembly with seven cylinder head screws M4 × 20 (12)
to the iCAT mini. Max. tightening torque 4 Nm.
4 Tighten the push-in fitting ø 6 using the screw-in aid AF11 (10).
5 Insert the shielding gas hose (11) and connect it to the shielding gas supply.
4 5
9 Push-in fitting
10 Screw-in aid AF11
11 Shielding gas hose
12 7 cylinder head screws M4 × 20
iCAT mini
6
7
8
9
10
11
ø 6 / G1/8"
ø 6
BAL.0361.0 • 2017-05-05