Checking The Front And Rear Brake Pads; Checking The Brake Fluid Level - Benelli TRK 502 Bedienungsanleitung

Periodic maintenance and adjustment
Checking the front and rear brake
pads
The front and rear brake pads must be
checked for wear at the intervals specified
in the periodic maintenance and lubrication
EN
chart.
6
Front brake pads
1. Brake pad wear indicator
Each front brake pad is provided with wear in-
dicators, which allows you to check the brake
pad wear without having to disassemble the
brake. To check the brake pad wear, check the
position of the wear indicators while applying
the brake.
If a brake pad has worn to the point that a
wear indicator almost touches the brake disc,
have a Benelli dealer replace the brake pads
as a set.
Rear brake pads
1. Brake pad wear indicator
Each rear brake pad is provided with wear in-
dicator grooves, which allow you to check the
brake pad wear without having to disassem-
ble the brake.
To check the brake pad wear, check the wear
indicator grooves. If a brake pad has worn to
the point that a wear indicator groove almost
appears, have a Benelli dealer replace the bra-
ke pads as a set.
6 - 20

Checking the brake fluid level

Before riding, check that the brake fluid is
above the minimum level mark.
Check the brake fluid level with the top of the
reservoir level.
Replenish the brake fluid if necessary.
Front brake
Front brake fluid reservoir