Shifting; Tips For Reducing Fuel Consumption - Benelli TRK 502 Bedienungsanleitung

Operation and important riding points

Shifting

6
EN
5
4
5
3
2
2
N
1
1. Shift pedal
2. Neutral position
Shifting gears lets you control the amount of
engine power available for starting off, accele-
rating, climbing hills, etc.
The gear positions are shown in the illustra-
tion.
TIP
To shift the transmission into the neutral po-
sition, press the shift pedal down repeatedly
until it reaches the end of its travel, and then
slightly raise it.
NOTICE
• Even with the transmission in the neu-
tral position, do not coast for long pe-
riods of time with the engine off, and
do not tow the motorcycle for long
distances. The transmission is proper-
ly lubricated only when the engine is
running. Inadequate lubrication may
damage the transmission.
• Always use the clutch while changing
gears to avoid damaging the engine,
1
transmission, and drive train, which
are not designed to withstand the
shock of forced shifting.
5 - 2

Tips for reducing fuel consumption

Fuel consumption depends largely on your
riding style. Consider the following tips to re-
duce fuel consumption:
• Shift up swiftly, and avoid high engine-
speeds during acceleration.
• Do not rev the engine while shifting
down, and avoid high engine speeds
with no load on the engine.
• Turn the engine off instead of letting it
idle for an extended length of time (e.g.,
in traffic jams, at traffic lights or at railro-
ad crossings).