Auxiliary Lights - Benelli TRK 502 Bedienungsanleitung

Auxiliary lights

If an auxiliary light does not come on, replace
it as follows.
The following procedure is applied to both
the front lights.
Auxiliary lights
NOTICE
Given that the projector bulb reaches very
high temperatures, we recommend not
touching it with the hands until it has co-
oled down.
1. Remove the right and left inspection lids
2 3
2. Disconnect the connectors of the lamp to
be replace
3. Release the fixing spring
4. Extract the lamp.
NOTICE
Avoid touching the glass part of the projec-
tor lamp to keep it clean from any oil trace.
On the contrary, the glass transparency,
the duration f the bulb, the luminosity of
the progected light beam maybe affected.
If the bulb becomes dirty, accurately clean
it using a cloth wet with alcohol or thinner
for enamel.
6 - 31
Periodic maintenance and adjustment
5. Installthe new lamp and fix it using the
fixing spring.
6. Connect the connectors of the new lamp.
7. Connect the right and left inspection lids.
EN
6