Benelli TRK 502 Bedienungsanleitung Seite 130

ITEM CHECKS
Brake and clutch
levers
Sidestand
Chassis fasteners
Instruments, lights,
signals
and switches
Sidestand switch
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
•
Make sure that operation is smooth.
•
Lubricate pivots if necessary.
•
Make sure that all nuts, bolts and screws are properly tightened.
•
Tighten if necessary.
•
Check operation.
• Correct if necessary.
•
Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Benelli dealer check vehicle.
For your safety – pre-operation checks
4 - 3
EN
4