Benelli TRK 502 Bedienungsanleitung Seite 126

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the start/engine stop switch is set to "
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Press the electric start button.
Does the engine start?
YES
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Press the electric start button.
Does the engine start?
YES
The system is OK. The motorcycle can be ridden.
".
NO
NO
NO
3 - 17
Instrument and control functions
WARNING
• The vehicle must be placed on the centerstand du-
ring this inspection.
• If a malfunction is noted, have a Benelli dealer check
the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until checked by
a Benelli dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Benelli dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Benelli dealer.
EN
3