Description - Echo CS-320 TES Bedienungsanleitung

GB
1. OPERATOR'S MANUAL - Included with unit. Read
before operation and keep for future reference to
learn proper, safe operating techniques.
2. FRONT HAND GUARD - Guard between the front
handle and the saw chain for protecting the hand
from injuries and aiding in control of the chain saw if
the hand slips off the handle. This guard is used to
activate the chain brake which is to stop the saw
chain rotation.
3. CONTROL LEVER - Device for connecting and
disconnecting the ignition system and thus allowing
the engine to be started or stopped, and device for
enriching the fuel/air mixture in the carburettor to aid
cold starting.
4. REAR HANDLE (FOR THE RIGHT HAND) -
Support handle located towards the rear of the
engine housing.
5. SILENCER COVER - Cover the silencer not to
make operator touch to hot surface of silencer.
6. CLUTCH COVER - Protective cover to the guide
bar, saw chain, clutch and sprocket when the chain
saw is in use.
7. CHAIN TENSION ADJUSTER - Device to adjust
chain tension.
8. CHAIN CATCHER - A projection designed to
reduce the risk of the operator's right hand from
being hit by a chain which has broken or derailed
from the guide bar during cutting.
9. SPIKED BUMPER - Device, fitted in front of the
guide bar mounting point, acting as a pivot when in
contact with a tree or log.
10. GUIDE BAR - The part that supports and guides the
saw chain.
11. CHAIN - Chain, serving as a cutting tool.

DESCRIPTION

12. SAFETY DECAL - Part Number X505-000370
13. FRONT HANDLE (FOR THE LEFT HAND) -
Support handle located at the front of the engine
housing.
14. FUEL TANK CAP - For closing the fuel tank. Turn
cap clockwise to tighten. Tighten it firmly with hand.
15. OIL TANK CAP - For closing the oil tank. Turn cap
clockwise to tighten. Tighten it firmly with hand.
16. STARTER HANDLE - The grip of the starter, for
starting the engine. ("ES" START)
17. LIFTING HOOK - If working off the ground the
operator must be trained in safe climbing
techniques and use of all recommended safety
equipment.
18. AIR CLEANER COVER - Covers air filter.
19. CLEANER COVER KNOB - Device for installing the
air cleaner cover. Turn cleaner cover knob
clockwise to tighten. Tighten it firmly with hand.
20. THROTTLE TRIGGER - Device activated by the
operator's finger, for controlling the engine speed.
21. THROTTLE TRIGGER LOCKOUT - A safety lever
which must be depressed before the throttle trigger
can be activated in order to prevent the accidental
operation of the throttle trigger.
22. GUIDE BAR COVER - Remove device for covering
the guide bar and saw chain during transport and
other times when the chain saw is not in use.
21
(See page 20)
CS-320TES/CS-350TES
E
N
G
L
I
S
H
D
E
U
T
S
C
H
E
S
P
A
Ñ
O
L