Disposal; Materials; Consumables; Packaging - Abicor Binzel ABIDRIVE 2 Betriebsanleitung

12 Disposal

12 Disposal
When disposing of the system, local regulations, laws, provisions, standards and guidelines must be
observed. To correctly dispose of the product, it must first be disassembled.
Please take note of the following information:
 11 Disassembly on page EN-31

12.1 Materials

This product is mainly made of metallic materials, which can be melted in steel and iron works and are thus
almost infinitely recyclable.
The plastic materials used are labelled in preparation for their sorting and separation for later recycling.

12.2 Consumables

The ABIDRIVE V2 itself does not contain any consumables.

12.3 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
EN - 32
TIG cold-wire feeder