Identification; Safety; Obligations Of The Operator En; Personal Protective Equipment (Ppe) En - Abicor Binzel ABIDRIVE 2 Betriebsanleitung

TIG cold-wire feeder

1 Identification

The ABIDRIVE V2 is a wire feeder. It is used in industry for delivering welding filler materials for manual
and automatic TIG cold-wire welding processes. The most important components of the ABIDRIVE V2 are
the wire feeder with separate power supply, the wire spool and the control modules integrated into the
housing. These operating instructions only describe the ABIDRIVE V2.
1.1 CE marking
This device fulfils the requirements of the relevant EU directives.

2 Safety

The enclosed safety instructions must be observed.
2.1 Obligations of the operator
• Store the operating instructions within easy reach of the device for reference and enclose them when
passing on the product.
• Commissioning, operating and maintenance work may only be carried out by qualified personnel.
Qualified personnel are persons who have received the necessary specialist training, knowledge and
experience to assess the tasks assigned to them and identify possible dangers (in Germany see
TRBS 1203 [Technical Rules for Operating Safety]).
• Keep other people out of the work area.
• Please observe the occupational health and safety regulations of the relevant country.
• Ensure the work area is well lit and keep it clean.
• Occupational health and safety regulations of the relevant country. For example, in Germany:
Arbeitsschutzgesetz (Occupational Health and Safety Act) and Betriebssicherheitsverordnung
(Ordinance on Industrial Safety and Health)
• Regulations on occupational safety and accident prevention
2.2 Personal protective equipment (PPE)
To avoid danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves and
safety shoes.
Conformity is confirmed by the CE marking on the device.
1 Identification
EN - 3