Abicor Binzel ABIDRIVE 2 Betriebsanleitung Seite 58

6 Putting into operation
2 Insert the control lead connector (4) into the ABIDRIVE connection bush (1) and secure it by turning the
nut clockwise.
3 Insert the central connector (3) into the ABIDRIVE connection bush (1).
6.8 Mains port
Dangerous voltage
Electric shock caused by incorrectly installed and damaged cables. For the complete duration of work:
• Connect the ABIDRIVE only to properly earthed power sockets.
• Check all live cables and connections for proper installation.
• Replace defective, deformed or worn parts.
NOTICE
• For the mains voltage and fuse protection, please refer to the technical data or the nameplate.
 Fig. 20 Overview of connections and control elements on page EN-26
1 Connect the female connector to port X2.
2 Connect the mains plug (9).
EN - 22
DANGER
 4 Scope of delivery on page EN-7
TIG cold-wire feeder