Front Panel; Display Indicators - Abicor Binzel ABIDRIVE 2 Betriebsanleitung

6 Putting into operation

6.3 Front panel

1
9
8
1 Display for parameter indicator
2 Display for parameter value
3
Feed rate [m/min]
Fig. 5 Front panel display

Display indicators

Left display (1)
Indicator Description
SPE Wire feed rate
(0.2 – 8.0 m/min)
dt Wire feed delay time
(0 – 3 sec.)
re Wire retraction time (off – 3 sec.)
ton Wire feed with interval (0.1 – 5 sec.)
Only if function type (7) 'interval' has
been selected
tof Wire feed interval break
(0.1 – 5 sec.)
Only if function type (7) 'interval' has
been selected
run While welding with a wire feed
- - - During the break with an interval
Tab. 9 Display indicators after switching on
EN - 12
7
4 Parameter time [sec]
5 Knob for setting parameters
Right display (2)
Indicator
Value between
0.2 and 8.0
Value between
0 and 3.0
Value between
Off and 3.0
Value between
0.1 and 5.0
Value between
0.1 and 5.0
2
6
6 Parameter selection 8 Wire feed
7 Function type selection 9 Wire retraction/function
button
Description
Indicator (3) (top) in m/min
Indicator (4) (bottom) in seconds
Indicator (4) (bottom) in seconds
Indicator (4) (bottom) in seconds
Indicator (4) (bottom) in seconds
TIG cold-wire feeder
3
4
5