Disposal; Disposal Of Materials; Disposal Of Consumables; Packaging - Abicor Binzel ABICAR ADVANCED Betriebsanleitung

12 Disposal

12 Disposal

12.1 Disposal of materials

This product is mainly made of metallic materials, which can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labelled in preparation for their sorting and
separation for later recycling.

12.2 Disposal of consumables

Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the
consumables' manufacturer.
► Please observe the relevant local regulations and disposal instructions in the safety data sheets
specified by the manufacturer of the consumables.

12.3 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.

13 Warranty

This product is an original ABICOR BINZEL product. Alexander Binzel Schweisstechnik GmbH & Co. KG
guarantees that the product has been manufactured without defects and offers factory manufacturing and
functional warranty for this product upon delivery in line with current state-of-the-art technology and the
current regulations. If ABICOR BINZEL is responsible for a defect that occurs, ABICOR BINZEL is obliged to
remedy the defect or deliver a replacement at its own cost and its own discretion. The warranty covers
manufacturing faults, but not damage resulting from natural wear and tear, overloading or improper use.
The warranty period is defined in the General Terms and Conditions. Exceptions in the case of specific
products are regulated separately. The warranty will also be rendered invalid if spare parts and wearing
parts are used that are not original ABICOR BINZEL parts and if the product has been repaired improperly
by the user or a third party.
Wearing parts are excluded in general from the warranty. In addition, ABICOR BINZEL is not liable for
damage caused by using our products. Questions about warranty and service can be addressed to the
manufacturer or our distributors. For more information, visit www.binzel-abicor.com.
EN - 22
Equipment marked with this symbol is covered by European Directive 2012/19/EU
on waste electrical and electronic equipment (WEEE).
► Do not dispose of electrical devices with household waste.
► Disassemble electrical devices before they are disposed of.
 11 Disassembly on page EN-21
► Dispose of components from electrical devices by means separately collected,
environmentally responsible recycling.
► Observe local regulations, laws, provisions, standards and guidelines.
► Please consult your local authority for information about collection and return of
electrical devices.
ABICAR ADVANCED