Steering Lock - SWM Superdual 2017 E4 Handbuch

PROVISION FOR 12V POWER SUPPLY
The motorcycle is equipped with a connector to
power an external device with a voltage of 12V and
maximum absorption of 4.5A.
Proceed as follows to access the connector:
- Unscrew the four screws (1) and remove the fair-
ing (2).
- Remove the casing (3) by pulling it outward.
- Extract the connector (4) and remove the cap (5).
NOTE:
Connect the device using the relevant connector.
4
1
5

STEERING LOCK

The motorcycle comes with a steering lock located
on the ignition switch (1).
Lock the steering as follows:
- Turn handlebar to the left
- Insert key (2) in the ignition switch (1) set to OFF.
- Press the key in (2) and turn it anticlockwise to
position
- Remove the key (2).
To unlock the steering lock, reverse the above pro-
cedure.
1
2
3
2
1
EN - 17