Icom IC-R30 Bedienungsanleitung Seite 142

7
WEITERE FUNKTIONEN
■ Informationen zur Fernsteuer-(CI-V-)Buchse
D Befehlstabelle (Fortsetzung)
Befehl Sub-Befehl
16* 59
5B
5F
60
61
62
63
64
18 00
01*
1
19 00
1A 00*
01*
02 Siehe S. 7-37 Set the receive frequency (The receive mode is automatically set, according
03
04*
06*
07* 0000 bis 0255 Send/read the AF gain level and cancel the mute
08*
09
0A 00 Siehe S. 7-39 Start a scan
01
02
03
04
0B 00*
01 Siehe S. 7-39 Transceive setting in a scan for transceive
02 Siehe S. 7-39 Read the scan condition
0C Siehe S. 7-40 Read the scan type
0D 00 Siehe S. 7-42 Read the Program link name
0E 00 Siehe S. 7-42 Read the Program scan edge name
01
* Schreiben/Lesen von Daten
Daten
00/01 Send/read the display type
(00=Single band display, 01=Dual band display)
00/02 Send/read the D-STAR digital squelch (D.SQL) setting
(00=OFF, 02=CSQL)
00 bis 02 Send/read the dPMR digital squelch (D.SQL) setting
(00=OFF, 01=COM ID, 02=CC)
00/01 Send/read the NXDN digital squelch (D.SQL) setting
(00=OFF, 01=RAN)
00/01 Send/read the DCR digital squelch (D.SQL) setting
(00=OFF, 01=UC)
00/01 Send/read the dPMR SCRAMBLER function status
(00=OFF, 01=ON)
00/01 Send/read the NXDN ENCRYPTION function status
(00=OFF, 01=ON)
00/01 Send/read the DCR ENCRYPTION function status
(00=OFF, 01=ON)
Turn OFF the receiver
Turn ON the receiver (See page 7-35)
Read the receiver ID
00/01 Send/read the ANL (Automatic Noise Limiter) function
(00=OFF, 01=ON)
00/01 Send/read the Earphone mode
(00=OFF, 01=ON)
to the band that the set frequency belongs.)
00/01 Select the frequency or channel change direction
(00= Down, 01=Up)
00 bis 02 Send/read the Operating mode
(00=VFO mode, 01=Memory mode, 02=WX (Weather Alert) mode)
00/01 Send/read the A band and B band audio level synchronize setting
(00=A/B Link, 01=A/B Separate)
(0000=Minimum bis 0255=Maximum)
00 bis 02 Send/read the SKIP/PSKIP setting
(00=OFF, 01=SKIP, 02=PSKIP)
00/01 Start/Stop recording
(00=Stop, 01=Start)
Cancel the scan
Set the temporally skip setting (Frequency or Memory channel)
00/01 Read the temporally skip setting
(00=Temporally skip is NOT set, 01=Temporally skip is set)
Cancel all the temporally skip settings
00/01 Send/read the transceive setting in a scan
(00=transceive OFF, 01=transceive ON)
00/01 Read the Program scan edge name change
(00=Not changed from the previous read,
01=Changed from the previous read)
Beschreibung
7-33