Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Conditions For Use - EKOM DUO Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DUO, DUO 2V, DUO 2

INSTALLATION

CONDITIONS FOR USE

 The device may only be installed and operated in dry, well-ventilated and clean environments with
environmental parameters that meet the requirements specified in Chapter 7, Technical data. The
compressor must be installed so that it is accessible at all times for operating and maintenance.
Please ensure that the label on the device is readily accessible.
 The device must stand on a flat, sufficiently stable base (be aware of the weight of the compressor,
see Chapter 7, Technical data).
 The device may not be operated outdoors or in otherwise wet or damp environments. Do not use
the compressor in the presence of explosive gases, dust, or flammable liquids.
 Before connecting the compressor to medical equipment, the supplier must confirm that it meets
all requirements for its use. Refer to the technical data of the product for this purpose. When a
unit is to be built-in, classification and evaluation of compatibility must be done by the manufacturer
or supplier of the product to be used.
 Any other use or use outside this framework is not considered as intended use. The manufacturer
is not responsible for any damages arising from such use. The operator/user assumes all risks.
Only a qualified professional may install the compressor and place it into operation
for the first time. This professional is obliged to train operating staff as to the use
and maintenance of the device. Installation and training of all operators shall be
confirmed by the installer's signature on the certificate of installation.
Prior to installation, ensure that the compressor is free of all transport packaging
and stabilizers to avoid any risk of damage to the product.
Parts of the air pump and suction unit may be hot and reach hazardous temperatures
during compressor operation and may pose a contact risk for operators or materials.
Burn or fire hazard! Caution! Hot surface!
Ambient operating conditions
Temperature:
Max. relative humidity:
Max. absolute humidity:
05/2018
+5°C to +40°C,
70%,
3
15 g/m
.
- 19 -
NP-DUO-2_05-2018-MD

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Duo 2vDuo 2

Inhaltsverzeichnis