Installation Of Options - Siemens SIPART PS2 Betriebsanleitung

Operating instruction
4

Installation of Options

(see Figure 4, page 63)
Unscrew housing cover.
•
Unscrew module cover (1).
•
J module: Insert the J
•
y
connection with the accompanying ribbon cable (6).
Alarm module: Insert the alarm module (4) into the upper PCB slot guide of the container, make the electrical
•
connection with the accompanying ribbon cable (5).
44
module (3) into the lower PCB slot guide of the container, make the electrical
y
SIPART PS2 EEx d FF
A5E00351419--01