Qualified Personnel; Trademarks - Siemens SIPART PS2 Betriebsanleitung

Operating instruction

Qualified personnel

are persons familiar with the insallation, assembly, commisioning and operation of the product and who have the
appropriate qualifications for their activities such as:
• training or instruction or authorization to operate and maintain devices/systems according to the standard
of safety technology for elecrical circuits, high pressures and corrosive as well as hazardous media.
• for devices with explosion protection: training or instruction or authorization to be allowed to work on elec-
trical circuits for potentially explosive systems.
• training or instruction according to the standards of safety engineering in the care and use of suitable sa-
fety equipment.
CAUTION
!
Modules which are sensitive to electrostatic charge may be destroyed by voltages which are
far below the human level of perception. These voltages occur already when you touch a
component or electrical connections of a module without first discharging yourself electrostat-
ically. The damage incurred by a module as a result of an overvoltage is not usually immedi-
ately perceptible but only becomes noticeable after a long time in operation.

Trademarks

SIMATICe, SIPARTe, SIRECe, SITRANSe are registered trademarks of Siemens AG.
Third parties using for their own purpoes any other names in this document which refer to trademarks might in-
fringe upon the rights of the trademark owners.
Use for the Intended Purpose
Use for the intended purpose in the sense of this manual means that this product is designed for use only for the
applications described in the catalog and in this technical description.
The product described in this manual has been developed, produced, tested and documented under consideration
of the pertinent safety standards. There is normally no danger of damage to property or injury to persons when
the handling regulations and safety instructions described for configuration, assembly, use for the intended pur-
pose and maintenance are observed. Low voltages which are connected must be generated by safe isolation.
36
SIPART PS2 EEx d FF
A5E00351419--01