Installation
3.3 Power connections
1
Power supply with EU adapter plug installed
2
UK adapter plug
8
Install the correct adapter plug on the supplied external power
supply
(Figure
1). Slide the adapter on until it "clicks" into position.
Plug the external power supply cord into the connector on the back
panel of the instrument, then plug the supply into a power outlet
(100–240 V~ / 50–60 Hz). Press the power switch on the back of
the instrument to initialize power
Figure 1 Power adapter
3
USA adapter plug
4
AUS/China adapter plug
(Figure 2 on page
9).