Altana BYK LCS III Betriebsanleitung Seite 66

requires a new baseline scan. When the baseline has been
scanned, the instrument is ready to scan one or more samples.
1. Press Wavelength Scan in the Main Menu.
2. Insert the blank cuvette/cell into the cuvette/sample cell holder.
3. Press Zero. "Zeroing" appears below the graph as the baseline
scan begins.
4. Insert the prepared sample cuvette/cell into the cuvette/sample
cell holder.
5. Press Read. Below the graph "Reading" appears and a graph
of the absorbance or transmittance values at the scanned
wavelengths is displayed continuously.
The Wavelength Scan is complete, if
• the graph is shown full size,
• the scaling of the x-axis fits automatically,
• the Cursor functions in the vertical navigation bar are
highlighted.
Standard Operations
65