Print Data - Altana BYK LCS III Betriebsanleitung

Standard Operations
5.2.6.2 PC setup

5.2.6.3 Print data

24
1. Press PC.
2. Press Setup to display the PC Setup screen.
3. With Auto-Send ON selection each measurement result will be
automaticly sent to a PC.
4. Select Remote to etablish a bi-directional PC connection to
send and receive commands and data (reserved for advanced
application).
1. Press Recall Data in the Main Menu.
2. Select the data source, where the data to be printed are stored.
3. A list is displayed. Data can be filtered. For more information
see 5.3.1.2 Recall stored data from the color log or the data log
on page 28.
4. Press the Printer icon.
5. Highlight Single point or Filtered data or All data and press
OK to confirm.
6. Sending Data is displayed until the data have been printed.