General - LR-Cal LPC 200 Betriebsanleitung

Pressure Calibrator
LPC 200

1. General

GB
In the following chapters detailed information on the Pressure Calibrator LPC 200
and its proper use can be found.
Should you require further information, or should there be problems which are not
dealt with in detail in the operating instructions, please contact LR-Cal /
DRUCK & TEMPERATUR Leitenberger GmbH, www.druck-temperatur.de
Factory calibration of the instrument is according to relevant international stand-
ards.
The warranty period for the Pressure Calibrator LPC 200 is 4 months according to
the general terms of supply of ZVEI.
The guarantee is void if the appliance is put to improper use or if the operating
instructions are not observed or if an attempt is made to open the appliance.
We also point out that the content of these operating instructions neither forms part
of an earlier or existing agreement, assurance or legal relationship nor is meant to
change these. All obligations of LR-Cal (Leitenberger) result from the respective
sales contract and the general business terms of LR-Cal (DRUCK & TEMPERATUR
Leitenberger GmbH.
Names of companies or products mentioned in this handbook are registered trade
marks of the manufacturer.
We reserve the right to effect reasonable changes on the basis of technical
improvements.
Any reproduction of this manual or parts thereof by any means is prohibited.
Version key regarding firmware and respective manual.
Manual
V 1.1
© 008 Copyright DRUCK & TEMPERATUR Leitenberger GmbH, Germany.
4
Firmware
>1.06
LR-Cal Operating Instructions Pressure Calibrator LPC 200