Info Display - LR-Cal LPC 200 Betriebsanleitung

Pressure Calibrator
LPC 200

6.2.4 Info display

GB
Different functions can be added to the display via the MODE key, e.g. the Info
display function: Info (INFO).
Activating the Info display by:
pressing the MODE key three times* (directly in the standard working mode).
* If you are not in the standard measuring mode, press the MODE key until the Info display appears on the
display).
1

3
4
5
6
7
8
1) LPC 200 serial number
) Current firmware version on the device
3) Internal sensor number of the currently connected sensor
4) Pressure rate of the currently connected sensor
5) Precision in % FS of the currently connected sensor
6) Measuring range beginning of the currently connected sensor
7) Measuring range end of the currently connected sensor
8) Calibration date of the currently connected sensor
Return to the standard measuring mode by pressing this key several times.
MODE
0
Info display
LR-Cal Operating Instructions Pressure Calibrator LPC 200